Baileigh Industrial BS-330SA Semi-Auto Bandsaw

The BS-330SA semi-automatic bandsaw from Baileigh Industrial is based off of the BS-330M that has has been a mainstay in our lineup since it was introduced in 2005. Because of its great history, this saw will provide years of trouble free use in any environment. The BS-330SA uses an industrial grade hydraulic system to clamp the vise, lower the head, and raise the head back up after the cut is done. This system greatly improves productivity. The blade is powered by a 3 hp motor the t runs on 220 volt 3 phase power for the best reliability on the market. The Blade speed on the BS-330SA is variable form 82 to 270 feet per minute. This allows the operator to set the speed at the perfect fpm for the material being cut. With its maximum capacity of 13” OD round and up to 13" x 18½" rectangle when stood upright, the BS-330SA will handle just about any task. A large 1-1/4” blade runs through tungsten carbide blade guides for a more precise cut, both are standard issue on the BS-330SA. The BS-330SA semi-automatic bandsaw features a mitering head that can go to 45 degrees. Like most bandsaws from Baileigh Industrial, the mitering head and bow are made from heavy duty cast iron to reduce vibrations during the cutting process. A laser pointer and large capacity flood coolant system round out the list of impressive features on the BS-330SA. The BS-330SA is typically in stock for quick deliveries.

Please Call for Freight Quote!

Specifications:

• Capacity Round | (90°/45°) | 13"/8.86"
• Capacity Square | (90°/45°) | 13"/8.86"
• Capacity Rectangular | (90°/45°) | 13" x 18.9" / 11" x 10.04"
• Blade Size (HxWxL) | 1.3"/.043"/161.4"
• Blade Speed (fpm) | 82-270
• Blade Guide | Carbide/Roller
• Miter Angle | 0-45°
• Miter Adjustment | Swivel Head and Vise
• Table Height | 30.5"
• Descent Control | Pressure Assist Hydraulic
• Return | Hydraulic
• Drive | Belt/Pulley
• Motor | 3 hp
• Power | 220V/3-Phase