BendPak HD-9XW 4 Post 9,000 LB Lift (Standard Width/High Lift)

The HD-9XW is a standard width, extra-tall lift that offers ample overhead clearance and enough side room to park light-duty trucks, SUVs and virtually all low ground-clearance vehicles.

The ​Four-Post Lift with Standard Width and Extra Height

When your garage isn’t cramped for space, you have more lifting options. The HD-9XW is made for the garage with a generous ceiling height, so high-rise vehicles can park on the lower level. Unlike our narrow-width HD-9ST four-post lift, this model comfortably holds wide-body trucks and SUVs without you having to worry about scratching up the mirrors or doors. With 82” of rise out of the runways, you can lift those heavy machines higher, leaving more room for taller mechanics to operate underneath. There’s also more room to park high-clearance trucks and SUVs. This eliminates the disappointment of buying a new lift and discovering your taller vehicle won’t even fit underneath. The only way to get more width than this is to check out BendPak’s HD-9SW, a super-wide lift. We’re proud to be able to say the HD-9XW is arguably one of our most versatile and user-friendly lifts for serious DIY’ers and shop owners. The extra ceiling clearance you need means this car lift is generally the found as the property of daily wrenchers with dedicated service garages. However, if you’re just looking for vehicle storage and want ample space for your lower-level vehicle, this lift is an ideal choice. The HD-9XW is completely certified according to the ANSI/ALI ALCTV-2011 standard. That’s why this lift is seen in shops nationwide and across the globe. There’s no “safer” car lift rating, and only BendPak offers that quality and many other built-in safety features (slack-cable locks, single-point lock release, non-slip runways, magnificent power coat finishing, etc.) with a warranty so good, we trademarked it!

Features:

• 9,000-lb. maximum lifting capacity
• CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
• Freestanding design
• High-rise
• Perfect for parking, storage and service
• Runways accommodate narrow and standard vehicles
• Runways include rail-kit for optional accessories
• Electric-hydraulic power system
• Single hydraulic cylinder mounted underneath runway
• Fully enclosed lifting cables, safety locks and sheaves
• Internal anti-sway slider blocks in each column
• Oversized self-lubricating cable rollers
• Features heavy-duty 3/8" aircraft cable
• Rugged 1.25" roller axles
• Multi-position safety locks in each column
• Adjustable lock ladders
• Runways feature a durable matte finish
• Push-button pneumatic safety release
• Independent backup slack-cable safety latches
• Customizable power unit location
• Removable approach ramps for additional drive-under clearance
• Longer approach ramps for low-ground clearance vehicles available
• Optional drive-thru ramps available
• Optional drip trays available
• Optional solid deck available to increase storage capacity
• Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
• ETL Approved

Specifications:

• Capacity
• Lifting Capacity* 9,000 lbs. (4,082 kg)
• *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
• *Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
• Rise
• A - Min. Runway Height: 5" (127 mm)
• B - Max. Rise: 82" (2,083 mm)
• C - Max. Lifting Height: 87" (2,210 mm)
• Time to Full Rise: 50 seconds
• Outside Dimensions
• D - Overall Width: 110.25" (2,800 mm)
• E - Outside Length: 198" (5,029 mm)
• F - Overall Length: 224.5" (5,702 mm)
• G - Height of Columns: 100.25" (2,546 mm)
• Inside Dimensions
• H - Width Between Columns: 100.25" (2,546 mm)
• I - Drive-Thru Clearance: 86.5" (2,197 mm)
• Runways
• J - Runway Width: 19" (483 mm)
• K - Length of Runways: 182.25" (4,629 mm)
• L - Width Between Runways: 35" (889 mm) or 41" (1,041 mm)
• M - Runway Centerline: 56.75" (1,441 mm) or 63" (1,600 mm)
• N - Outside Edge of Runways: 75.75" (1,924 mm) or 82" (2,083 mm)
• Minimum Wheelbase
• Rated Capacity: 135" (3,429 mm)
• 75% Capacity: 115" (2,921 mm)
• 50% Capacity: 95" (2,413 mm)
• 25% Capacity: 80" (2,032 mm)
• Locking
• Locking Positions: 17
• Lock Spacing: Every 4" / 102 mm
• Power Unit
• Motor: 220 VAC / 60 Hz. 1Ph.
• Noise: 45 dB
• Shipping
• Weight: 1,778-lbs. (806 kg)
• Dimensions: 191'' x 22'' x 28'' (4,851 mm x 558 mm x 711 mm)

Optional Accessories (Sold Separately):

• 5210207 | 4-Post Lift Aluminum Deck Platform / Diamond Plate
• 5210997 | Portable Wheel Kit / Fits HD-7 and HD-9 Series Four-Post Lifts / Set of 4
• 5150509 | 18 Gallon Rolling Drain Pan For 4-Post Lifts
• 5175800 | Fixed Sliding Jack Tray / FITS NARROW RUNWAY POSITIONS ONLY
• 5175349 | 6,000-lb. Capacity / Telescoping Sliding Jack Platform
• 5175801 | 3,000-lb. Capacity / Telescoping Boat Trailer Tongue Platform
• 5215306 | Compressed Air Bottle for 4-Post Lifts Safety Locks

PLEASE NOTE, IMPORTANT INFORMATION:

• This item ships by truck. Additional shipping charges will apply to ship to a Non-Commercial Address. (Liftgate Delivery is not an option on this product. You must provide a way to get it off the truck.)
• Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
• Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201
• BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).