OTC

OTC 4721 Bent Type CV Boot Clamp Cutter Designed to easily cut the CV boot clamp without damaging the boot.Will cut boot clamps up to 10 mm wide and .7 mm thick.Handles are spring loaded to the open...

OTC 4722 Heavy-Duty CV Boot Clamp Installer Required tool for correct installation of the heavy-duty clamps used on the S.S.G. hard plastic CV boots found on Chrysler, Plymouth, and Dodge front-wheel...

OTC 4723 Ear-Type CV Boot Clamp Pliers Designed to crimp the ear-type CV boot clamps used on front-wheel drive vehicles. Features: May also be used to crimp the type of clamps used on fuel and...

 OTC 4724 CV Boot Clamp Pliers Special tips work on the ear-less type CV boot clamps. Grips clamp in many positions to tighten clamp around boot.

OTC 4731A Honda/Acura Damper Holding Tool Holds dampener for removal/installation of the crank bolt on Honda/Acura engines 4" offset 1/2" square drive can be used with ratchet or breaker bar 50mm...

OTC Flywheel Puller Set Allows the crankshaft pulley and/or harmonic balancer bolt to be broken loose,  Includes tool necessary to properly counter the rotation of the crankshaft...

OTC 4739 Chain Brush Use to clean and oil various sized roller chains found on motorcycles, ATVs, machinery, etc. Brushes adjust to chain widths ranging from ¼" to 9/16".

OTC 4740 Spring Hook Made from heat treated alloy steel, designed for removing and installing hard-to-reach headlight adjusting springs, exhaust and brake springs. 6" reach.

OTC 4741 Pro Spoke Tool Use to tighten or loosen spoke nuts found on most motorcycle wheels Nine interchangeable wrench ends5.2 mm5.4 mm5.6 mm5.8 mm6.0 mm6.2 mm6.4 mm6.6 mm6.8 mm

OTC Flywheel Puller Set Developed for many small engines in the ATV and Motorcycle service markets.  These tools are machined from high quality tool grade steel and are packaged in a convenient...

OTC 4743 Motorcycle Brake Caliper Spreader Compresses the brake pistons on most style calipers for easy pad replacement. • Fits all front and some rear disc brakes. • Range: .25" (5 mm) to...

OTC 4744 CHAIN BREAKER This kit will break, press, and rivet most #25 - #35 and # 428 - #630 standard and O-ring roller chains. Includes HSS rivet tip for riveting hollow nose master links. The...

OTC 4745 Chain Master Link Clip Tool Designed specifically for roller style chains with specialized tips to easily remove and install master link clips. Includes comfort grip handles.

OTC 4746 Chain Master Link Plate Tool Tool will remove press-fit master link plates found on many standard and O-ring style roller chains.Will also break 40-60 series chains to add a master link or...

OTC 4747 Spoke Torque Wrench Set, 22 pc. DESCRIPTION Take the guesswork out of spoke wheel assembly and maintenance. This dual head spoke wrench offers install and removal in one wrench.  The...