OTC

OTC 7308 Hook Spanner Wrench These pieces will replace many fixed-size wrenches needed to service industrial tractors and other equipment. Their drop-forged jaws adjust to 11 positions for a...

OTC 7309 Heavy-Duty Adjustable Spanner Wrench Some jobs require beefier tools. Here's a wrench to fill that need. It's drop-forged and features extra heavy construction and a 3/4" thick, 11-position...

OTC 7310A Pitman Arm Puller This puller is designed for the toughest Pitman arm jobs. They're adjustable and have rugged forged jaws shaped to fit the job. Two clamp bolts lock the jaws on the...

OTC 7311A Pitman Arm Puller Features: Adjustable with special replaceable forged jaws Two clamp bolts lock jaws on Pitman arm Can perform other pulling jobs Services cars and light trucks to...

OTC 7313 Retaining Ring Pliers Removes the external retaining rings used in transmissions, differentials, and other automotive components. Specifications: Maximum Spread | 1-1/16" and 7-3/4"...

OTC 7314A Pitman Arm Puller This puller will handle nearly any Pitman arm job on passenger cars and light trucks. It features special forged jaws shaped to fit the job, ensuring a positive grip...

OTC 7315A Universal Tie Rod End Remover Tie Rod End Remover Redesigned to use on imports and many front wheel drive vehicles, including SUVs with rack and pinion steering. Live center tip on...

OTC 7317A Disc Brake Caliper This tool is a "must" item when installing new brake pads on vehicles with 4-wheel disc brakes. Rotate the tool on the parking brake actuator to retract the piston...

OTC 7318 Pilot Bearing Puller Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used. Operates on many models with engine chassis. -Capacity: 1/2” to...

OTC 7319 Pilot Bearing Puller Pilot bearing puller. Capacity: 7/8" to 2". I.D. reach: 1". Wt., 3 Ibs., 8 oz. Designed to pulley flywheel pilot bearings in close quarters where a slide hammer cannot...

OTC 7362 Power Steering Pump Remover Remove and install the power steering pump pulley easily and without damaging the pump shaft or pulley. -Includes remover and installer.

OTC 7367 Torque Multiplier, 1000lb-ft Drive Input; 1/2", 365 lb-ft Max • Drive Output; 3/4", 1100 lb-ft Max • Head Width; 2.9", 3.3:1 Ratio • Reaction Bar; 13-3/4" • Includes...

OTC 7368 Torque Multiplier, 2000 lb-ft Drive Input; 3/4", 730 lb-ft Max • Drive Output; 1", 2200 lb-ft Max • Head Width; 3.6", 3.3:1 Ratio • Reaction Bar; 15-5/8" • Includes...

OTC 7372 Rear Axle Pulling Attachment Rear Axle Puller This puller will enable you to remove flange-type rear axles from most late model cars and light trucks. It works on axles having bolts and...