OTC

OTC 7507 Universal Inner C.V. Joint Puller No. 7507 – CV joint fork only. Use with OTC slide hammer No. 1155, extension No. 7508, or both.

OTC 7508 Slide Hammer Extension No. 7508 – 17-1/2"-long slide hammer extension.

OTC 7509 CV Joint Tool This tool is a must when you are servicing outer tie rods. It works on imported and domestic models, front or rear wheel drive, cast or stamped-steel knuckles. Pry bars can...

OTC 7534 Upper Control Arm Wrench This specialized 1/2" drive wrench provides easy access to the upper control arm bolts for front wheel alignment jobs. -22 mm hex wrench for use on 1990-2005 2WD...

OTC 7544 Strut Rod Nut Socket (24 mm) Description: Strut Rod Nut Socket (24 mm) This specially designed socket is needed to loosen and tighten the top strut nut when servicing the strut spring...

OTC 7588A Cam Bushing Puller Removes rusted and seized bushing before resetting the caster/camber and easily pulls most aftermarket and OE bushings on Ford 4WD vehicles. It's the only tool available...

OTC 7595A Tie Rod Adapter Set Remove and install inner tie rods without removing steering gear. The adapters fit into the tie rod socket, and a 1/2" drive ratchet or breaker bar fits the drive end...

OTC 7612 Toyota Wrench No. 7612 – 54 mm hex socket fits front wheel bearing adjusting nut of Toyota FJ, LN, and RN. Has 1/2" square drive end, permitting use of a torque wrench. 1/2" sq. drive.

OTC 7628 5/16" Fuel Line Fitting Set Features: Fits GM vehicles with 5/16" fuel lines. Will work on low or high pressure TBI systems. Quick, easy, safe. Eliminates makeshift connections that can...

OTC 7629 3/8" Fuel Line Fitting Set Features: Fits GM vehicles with 3/8" fuel lines Will work on low or high pressure TBI systems Quick, easy, safe. Eliminates makeshift connections that can damage...

OTC 7631 5/16" Fuel Return Line Plug Description: Fuel service specialty toolFuel return line plug5/16 inch external OD measurement

OTC 7640 Adjustable Wrench The really big jobs call for really big tools. The OTC-7640 giant adjustable wrench is rated to withstand 2,000 ft. lbs. of torque. Specifications: Part No...

OTC 7641 Adjustable Wrench  The really big jobs call for really big tools.  The OTC-7641 giant adjustable wrench is rated to withstand 5,000 ft. lbs. of torque...

OTC Parasitic Draw Tester Finding electrical problems that drain the battery is getting harder all the time. But using No. 7645 with your digital amp meter takes the guess work out of a complicated...

OTC 7654A Serpentine Belt Installation Tool Three-pin design to accommodate serpentine, V-belts and timing belts. Durable tool provides extra control for push/pull applications. Ergonomic...