Clutch Jack

Kiene CC2051 Flywheel Adapter The CC2051 Flywheel Adapter Handles Flat  And "Pot-Type" Flywheels Used With 14" And 15-1/2" Clutches The safe way to install / remove flywheels Works with pot "" Deep Dish"" and flat flywheels  Quickly...

Kiene CC 2054 Drive Shaft Adaptor The Adapter Supports the drive shaft under the main carrier or on the shaft itself. Now, one mechanic can handle this cumbersome component. The Drive Shaft Adapter takes the lifting our of the mechanic's hands and puts...

Kiene CC 2055 Starter Motor Adapter The Starter Motor Adapter simplifies the removal and installation of heavy starters. Make the job easier, faster and safer, too. This Clutch Caddy Adapter makes removing or installing starter motors a safe one...

Kiene CC 2056 Auxiliary Case Adapter Remove the Auxiliary Case without removing the entire transmission - position the caddy and adapter - under the auxiliary case... secure...unbolt... and lower away gears and all - its that easy. This Clutch Caddy...

Kiene CC 2064 Ultrashift Clutch Adapter This Clutch Caddy adapter is used to safely remove / install the 200 lb DM clutch. Clutch is bolted together and lifted as one 200 lb unit Kit Includes: A longer 10 spline alignment shaft Leg extensions to...

Kiene CC2070 Clutch Caddy Adapter, 17" Single Disc Clutch - I-shift, mDrive This Clutch Caddy alignment shaft quickly replaces the standard 2" Caddy shaft and is used to remove/ install 17" single disc clutches AND flywheels on Mack mDRIVE and Volvo...

Kiene CC2071 Clutch Caddy Adapter, Detroit DT12, 17" Single Disc Clutch and Flywheel This Clutch Caddy alignment shaft quickly replaces the standard 2" Caddy shaft and is used to remove/ install 17" single disc clutches AND flywheels on the Detroit DT12...

Kiene CC2072 Clutch Caddy Adapter, Easton Endurant, 17" Single Disc Clutch and Flywheel This Clutch Caddy alignment shaft quickly replaces the standard 2" Caddy shaft and is used to remove/ install 17" single disc clutches AND flywheels on Eaton...

Kiene K-TRT-7/8 Tie Rod and Drag Link Remover The K-TRT allows you to use a .401 shank air-hammer or conventional swing and smash hammer to remove tie rod ends and drag links. Specifications: 7/8-14 thread size Ship Weight | 6 lbs

Norco 72033 Flywheel Adapter Optional equipment for models 72030B and 72035. Weight: 7 lbs. Click Here for 72033 Flywheel Adapter Parts List

NorcoIndustries 72037 Eaton Fuller Solo 14 Spline Clutch Disc Tool Optional equipment for 72030B clutch jack. Shipping Weight 9 lbs

NorcoIndustries 72038 Drive Shaft Support Adapter Features: Fits models 72030B and 72035 clutch jacks. Allows for the safe and secure removal and installation of drive shafts. Weight: 5 lbs.

OTC 515686 Splined Shaft for 5018A Clutch Jack Splined shaft, 1¾" dia. with 1¼" pilot. Wt., 5 lbs., 7 oz.No. 515686 – Splined shaft, 1¾" dia. with 1¼" pilot. Wt., 5 lbs., 7 oz.

OTC 516159 Splined Shaft for 5018A Clutch Jack Splined shaft, 1¾" dia. with 1" pilot. Needed for clutch service on some Navistar 466 series engines. Wt., 5 lbs., 7 oz.No. 516159 – Splined shaft, 1¾" dia. with 1" pilot. Needed for...

OTC 516160 Flywheel Attachment for OTC5018A Handles 14" and 15 1/2;" clutch assemblies weighing up to 250 lbs. Swivel casters provide easy maneuverability. Includes a 2" splined shaft with a 1¼" pilot to aid in alignment. 360 swivel head, minimum...

OTC 7028 Spicer Clutch Adjusting Wrench For Spicer-built Heavy-Duty Clutches. This easy-to-use clutch adjusting wrench will solve the difficult, time-consuming job of internal adjustment of Spicer angle-spring and multiple lever clutches found...

OTC 7072A Truck Clutch Alignment Shaft Features: 1-1/2" O.D., 1" pilot Constructed of a lightweight fiberglass-reinforced nylon body that won’t hang up in the clutch disc splines Designed for perfect fit to the spline of the clutch disc....