Dake 76202 Euromatic 370S-L Non-Ferrous

Finally - a user-friendly cold saw with "aggressive precision" and "stamina". These Automatic Euromatic Cold Saws feature 2 removable surface wear plates, and have a minimum 6” remnant drop piece size. They also have a head that rotates 45º right of center and up to 90º left of center. They also feature a manual oiler, three gib guides, a 3.5 HP motor or 4.5 HP motor, large automatic clamping vise, a self-adjusting metal chip brush, and a self-adjusting gripper-type feeder vise.

Features:

• Head rotates 45º right of center for miter cutting and up to 90º left of center for miter cutting and slotting.
• Table features two removable surface wear plates to support longer cut lengths.
• Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment.
• Rear surface of the gear box is machined with interlocking circles to evenly distribute oil over the ways.
• Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm.
• Minimum 6" remnant drop piece size for maximum material use.
• Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute.
• Manual oiler to lubricate 1" thick, hardened ways.
• 3.5/4.5 HP motor has the muscle to drive a 14-1/2" or 12" blade quickly and quietly through solids.
• Clear acrylic hood has shock assists for raising and lowering and electrical interlocks.

Standard Equipment:

• Blade
• Coolant
• Saw blade selector calculator
• Tool kit for changing blades
• Instruction and service manual

Specifications:

• Model | Euromatic 370S-L Non-Ferrous
• Number | 976202-2
• Voltage | 220 V/440 V, 3-phase
• Horsepower | 3.5/4.5
• Cutting Ability | Non-Ferrous / Plastic
• Maximum blade diameter | 14-1/2”
• Maximum vise opening | 8-3/4”
• Maximum feed vise opening | N/A
• Maximum Angle | 45° left
• Slotting | No
• Phase | 3
• Speeds | 1,500/3,000 rpm
• Weight | 1,360 lbs
• Solid round 90˚ capacity | 4-1/4”
• Solid round 45˚ capacity | 3-5/8”
• Tube 90˚ capacity | 5-1/16”
• Tube 45˚ capacity | 5"
• Square 90˚ capacity | 4-1/4”
• Square 45˚ capacity | 3-7/8”
• Rectangle 90˚ capacity | 4” x 7”
• Rectangle 45˚ capacity | 4” x 6”
• Work height | 35”
• Height | 73”
• Width | 28”
• Depth | 39"

PLEASE NOTE, IMPORTANT INFORMATION:

• Dake collects on all orders shipped to California