Jet 414499 J-7040-4, 10" x 16" Horizontal Bandsaw
Exclusive 6-point blade guide assemblies and swivel control panel on this rugged JET saw enhance overall function and performance
Features:
- Swing away control panel houses major saw controls
- Variable speed drive system allows the operator to easily fine tune the blade speed
- Adjustable blade guide with six contact point system that utilizes cam follower bearings mounted on eccentric shafts on both sides of the blades
- Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
- Patented 3-Jaw vise with rapid action moveable jaw for faster set up
- One-piece wheel cover
- Coolant system
- Adjustable material stop
- 1" Bi-Metal blade
Specifications:
- Cutting Capacity | 10"w x 16"d
- Round at 90 Degrees | 10"
- Round at 45 Degrees | 10"
- Rectangle at 90 Degrees | 10" x 10" and 7" x 16"
- Rectangle at 45 Degrees | 6-1/2" x 11"
- Vise Swivels | 45°
- Blade Speeds (SFPM) | 100 - 350
- Blade Wheel Diameter | 14"
- Blade Length | 135"
- Blade Size | 1" x .035" x 135"
- Bed Height | 23-1/2"
- Motor | 2 HP, 460V, 3Ph
- Weight | 927 lbs
- Overall Dimensions | 75-1/2"l x 33"w x 41"h
- Drive | Variable Speed
PLEASE NOTE, IMPORTANT INFORMATION:
- This item ships by truck. Please notify Mile-X Equipment if Liftgate and/or Residential Delivery is required. Please Note that for Residential deliveries, someone MUST be present at time of delivery.
- CAUTION | Be sure that the supporting structures and load attaching devices used in conjunction with this hoist provide an adequate safety factor to handle the rated load plus the weight of the equipment. If in doubt, consult a qualified structural engineer. This equipment is not to be used for lifting, supporting, or transporting people or lifting or supporting loads over people.
