Laguna 25-50 Classic Drum Sander w/ Closed Stand

PROMO ENDS 10/30/24

50” wide sanding capability in two passes, up to 25” wide in a single pass! The most affordable large capacity sander available. Imagine the range of projects you can precisely and consistently accomplish. Sand everything from stock as short as 2-1/4” or as thin as 1/32” and as wide as 50” (in two passes). The 25-50 includes a closed stand for storage with an incorporated mobile base for easy portability. The sanding drum is wrapped with 80 grit abrasive and the conveyor speed is infinitely adjustable from 0-10’ per minute. A full range of abrasives are available to accomplish everything from abrasive planing to finish sanding.

Features:

• Indexed alignment setting for narrow and wide stock. When sanding stock wider than 25", the index lever will properly adjust the conveyor for flawless
• wide sanding.
• Easy height adjustments. A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments.
• Drum will never go “out of alignment”. The drum carriage is bolted to the base, preventing any movement or alignment issues.
• Intellisand Technology: Automatically adjusts conveyor speed based on load.
• Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010 across the width of the sander.
• Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap.
• Tension rollers are adjustable in height and hold down pressure, eliminating snipe.

Specifications:

• Maximum Sanding Width | 50" (two passes)
• Minimum Sanding Length | 2-1/4"
• Maximum Sanding Thickness | 4"
• Minimum Sanding Thickness | 1/32"
• Dimensions | 27"D x 46"W x 53"H (on stand)
• Drum | 5 x 25 extruded aluminum
• Drum Speed | 1740 RPM
• Dust Hood | One 4″ vacuum port, min. 600 CFM recommended
• Conveyor Motor | 43 lb. torque, direct drive D.C. motor, range variable 0-10 FPM
• Drive Motor (TEFC) | 1-3/4 HP
• Power Requirements | 110 V 20 Amp service needed
• Shipping Weight | 369 lbs (3 boxes include stand)