Features:

• Blast away dirt, rust, paint and other unwanted deposits.
• For use with abrasive media including silica sand, glass beads, metal shot, aluminum oxide and nut shells.
• Readies surface for refinishing. Ideal for use in automotive, marine and industrial refinishing.
• Vacuum system, not available with conventional sand blasters, extracts debris and used abrasive. Filter system segregates used abrasive for reuse.
• Turbine vacuum system:
• Reduces abrasive consumption by 92%
• Reduces clean-up time
• Eliminates need for cumbersome breathing apparatus
• Keeps work area clean and free from debris. Debris collects in a removable container.
• 15-40 lb abrasive capacity
• 1000 W, 120 V
• CSA approved: CAN/CSA-C22.2 NO. 243-96
• Canada Made

 Use:

• Glass Etching: identification marks, artwork ect
• Deep surface cleaning to remove rust, paint and corrosion with no heat, no surface distortion and no dust.
• Grafitti removal from metal, concrete and stone
• Cleaning of tombstones
• Cleaning of acrylic paint which is brittle unlike powder paint

Operation:

Abrasive is drawn into the gun and projected through the nozzle to the work surface where the brush contains the media and debris. Used media and debris are returned under vacuum and separated. The used abrasive is reused, therefore a hard abrasive such as Aluminum Oxide is recommended (Uni-Ram Part Number: 27-914, 25 pound pail, NOT included with the unit) The used media is recirculated and can be reused until it breaks down. Most other abrasive media can also be used including glass beads, metal shot, nut shell, plastic pearls ect.

Specifications:

• Power 110-120V Standard (220-240V optional)
• Air Pressure and Vol - 75-160 PSI ; 8-22 CFM
• Hose Length - 8.5 Foot (2.5M) Standard
• Longer Hoses Available (Part # UN27-712)

Dims and Ship Weight:

• 20 x 18 x 36
• 64 Pounds