Zendex Go-Jak 6313 Dollies Model 6313 - Single Dolly
Replaces 6200
GoJak Model 6313 - Vehicles to 6,300 lbs. Tire widths to 13”, The Model 6313 is an ox. Able to jack vehicle weights to 6,300 lbs. (1,574 lbs. per wheel), including light duty trucks with tire widths up to 13 inches wide and 36 inches tall. This auto jack / dolly is the most versatile and strongest GoJak in the line. It has steel rollers, wider axles and two heavy-duty 5-inch diameter, and two heavy-duty 4-inch diameter, double-ball raceway casters. This combination makes for easier rolling with heavier loads. The Model 6313 has a 5-degree offset pedal for additional foot-to-tire clearance. The under frame clearance is increased an additional 2-1⁄2 inches over the 5211, which is very useful when pulling cars up flatbed trucks. Available in left and right hand units.Made in USA
How It Works:
GoJak operates on the principle of a quick action, bi-directional, double-pawl ratchet. Mechanical leverage applied to the foot pedal progressively “squeezes” the vehicle tire between the rollers until the tire lifts smoothly off the ground. The rollers touch only the tire - no contact with the vehicle’s frame or undercarriage is necessary. The low center of gravity after lifting helps make GoJak safe and stable in use. Its purely mechanical design eliminates the need for electric power, compressed air or slow and leaky hydraulics.
History:
GoJak was born in the body shop. In 1984, Al Coccaro, Zendex Tool Corp. President, needed an efficient means to move cars sideways to improve internal traffic flow in his auto body shop. After reviewing available methods, he soon realized the limitations of existing jacks and dollies. With all the different axle widths, wheelbases, wheel sizes and tire widths, most jacks simply would not work. The time-consuming task to jack up each wheel with a floor jack and insert a dolly was not acceptable. Clearly a better way was needed. After much trial and error, he conceived the GoJak self-loading dolly. For more than twenty years now, Mr. Coccaro has manufactured GoJak and a variety of other useful shop products. It’s so true: necessity is the mother of invention.
Where to use:
Body Shops
Move disabled vehicles, easily sideload spray booths and tight work areas. Bring in wrecks in less time with fewer people.
Towing Companies
Align cars for tow hook ups. Load and unload flatbed trucks. Save space in storage lots. Great for front wheel drives.
Showrooms
Effortlessly position cars on showroom floors, even on tile, wood or low pile carpeting. No more fumes, noise or confusion.
Classic Cars
Store or position your classic without worry. GoJakscontact only the tires, virtually eliminating possible damage.
Mechanical Shops
Easily move cars with drivetrain and other problems. GoJaks are especially handy in small shops and confined spaces.
Parking Garages
Move locked or blocked cars in seconds. No need to enter the car, unlock brakes, steering wheel or transmission.