Tuxedo

Tuxedo TLT210 Launch 10,000 lb Two Post Lift | Asymmetric

SKU: TUXTLT210XT
$4,699.00

Tuxedo Launch Tech USA TLT210-XT 10,000-Lb 2 Post Lift

Multi Purpose full asymmetric lift that is height and width adjustable and may be installed in a standard or rotated column configuration to accommodate the smallest Cars to the largest SUVs' and Trucks.  This ALI/ETL Certified lift comes with a one (1) year limited warranty.

Features:

  • Adjustable Column Height - Provides an extra 6" of height adjustment for ease of installation with various ceiling heights.
  • Adjustable Column Width - Provides and extra 6" of width adjustment for narrow service bays to custom fit your shop.
  • Rubber Door Guards - Provides added security against door damage.
  • Outer Hose Guards - Protects hydraulic hoses from damage.
  • Stackable Foot Pad Extensions - Extra tall applications are no problem with the two 6" tall and two 3" short extensions.
  • Single Point Lock Release - Allows technicians to disengage both column locks simultaneously.
  • Heavy-Duty Arm Restraint System - Oversize rugged steel gears, pins and springs for trouble free operation.
  • Double Telescoping Screw Pads - Used with or without rubber pads offering 6.5" adjustment for complete vehicle coverage.
  • Standard Asymmetric - Lift installed with columns facing each other.
  • Rotated Asymmetric - Lift installed with columns offset - rotated.

Specifications:

  • Maximum Lifting Height:
    • Standard: 76.4" (1940mm)
    • Rotated: 76.4" (1940mm)
  • Minimum Column Height:
    • Standard: 143" (3634mm)
    • Rotated: 143" (3634mm)
  • Cylinder Full Height:
    • Standard: 145.2" (3688mm)
    • Rotated: 145.2" (3688mm)
  • Total Width:
    • Standard: 136.6" (3470mm)
    • Rotated: 137.9" (3502mm)
  • Drive-Thru Clearance
    • Standard: 98.4" (2500mm)
    • Rotated: 92" (2338mm)
  • Floor to Overhead Switch:
    • Standard: 140" (3556mm)
    • Rotated: 140" (3556mm)
  • Front Arm Reach (min/max)
    • Standard: 23.6" (600mm) / 43.5" (1105mm)
    • Rotated: 23.6" (600mm) / 43.5" (1105mm)
  • Rear Arm Reach (min/max):
    • Standard: 38.6" (980mm) / 61.8" (1570mm)
    • Rotated: 38.6" (980mm) / 61.8" (1570mm)
  • Screw Pad Height:
    • Standard: 4" (101mm) to 7.5" (190mm)
    • Rotated: 4" (101mm) to 7.5" (190mm)
  • Inside Column Width:
    • Standard: 110.2" (2800mm)
    • Rotated: 101.9" (2588mm)
  • Motor:
    • Standard: 2 HP
    • Rotated: 2 HP
  • Voltage:
    • Standard: 208-230 Volt / 60hz / Single Phase
    • Rotated: 208-230 Volt / 60hz / Single Phase
  • Rise Speed:
    • Standard: 54 Seconds
    • Rotated: 54 Seconds
  • Max. Load Per Arm:
    • Standard: 2500 lbs (1134 Kilos)
    • Rotated: 2500 lbs (1134 Kilos)
  • Min. Ceiling Height Required:
    • Standard: 143.5" (3644mm)
    • Rotated: 143.5" (3644mm)
  • Narrow Bay Setting:
    • Standard: Deduct 5.9" (149mm)
    • Rotated: Deduct 5.9" (149mm)
  • Maximum Column Height:
    • Standard: 149" (3874mm)
    • Rotated: 149" (3874mm)
  • Capacity:
    • Standard: 10,000 lbs
    • Rotated: 10,000 lbs
  • Ship Weight:
    • Standard: 1,570 lbs
    • Rotated: 1,570 lbs
  • Ship Dimensions:
    • Standard: 110"L x 24"W x 48"H
    • Rotated: 110"L x 24"W x 48"H

PLEASE NOTE, IMPORTANT INFORMATION:

  • This item ships by truck and extra fees apply if Residential Delivery is required. Lift Gate CAN NOT be used to unload this item!!